Slider Bed Conveyors
These friction-driven conveyor belts with a supporting slider bed are ideal for low to medium-volume applications. These slider bed conveyors can be used to feed stationary compactors, side-eject balers, closed end horizontal balers, or auto-tie balers.
- SBW Class conveyor is designed for low volume applications from 1 to 2 tons per hour. Equipped with a 2 ply ruff top belt, this slider bed conveyor is designed for overhead conveying to compactors and low volume balers. Equipped with a motor between 2 to 5 horsepower they are available with belt widths between 24″ and 36″ with lengths up to 100′.
Systems Start at $5,000
- SB Class conveyor is designed for low volume applications from 2 to 4 tons per hour. Equipped with a 2 ply rubber cleated belt, this conveyor can feed balers or compactors. It can be installed in a pit (3 hp motor) or above ground with a hopper (2 hp motor). Belt widths are available from 24″ to 72″ with lengths up to 40′. It can also be equipped with a variable speed controller.
Systems Start at $8,000
- SBH Class conveyor is designed for medium volume applications from 3 to 15 tons per hour. Equipped with a 3 ply rubber cleated belt and spherical roller bearings, it can feed auto-tie balers or shredders. This below ground configuration can be equipped with motors from 3 horsepower to 10 horsepower. Belt widths from 36″ to 72″ and lengths up to 100′.
Systems Start at $10,000
Specially designed sizes and options available.
Complete turn key system design and installation available.
Please contact our office to discuss your application so we can customize one of the above slider bed conveyors to suit your specific needs.
We offer layout drawings and savings analysis at no cost or obligation.
LITERATURE / SPECS