|
|
 |
Conveyor Belts |
|
| These chain edged conveyor belts are ideal for medium to high volume applications. These conveyors can be used for MRF
sorting line feeds, mixed waste lines, or feed side-eject balers,
open end auto tie balers
or two ram balers . |
| |
|
* B class chain conveyor belt is designed for medium volume applications from 5 to 10 tons per hour. Equipped with a wr78 chain (2.609" pitch mill chain) it has a 220# 2 ply belt. Its below ground configuration allows you a pit length up to 15' with a width of 5'. It can also be installed as an above ground operation. The shaft height can go up to 13' and can be equipped with an optional variable speed controller.
Systems start at $32,000
|
| |
|
* A class chain conveyor belt is designed for medium to high volume applications from 12 to 20 tons per hour. Equipped with a wr124 chain (4" pitch mill chain) it has a 330# 3 ply belt. Its below ground configuration allows you a pit length up to 50' with a width of 6'. The shaft height can go up to 20' and is equipped with a variable speed controller.
Systems start at $35,000
|
| |
|
* AR class chain conveyor belt is designed for high volume applications from 20 to 30 tons per hour. Equipped with a RS933F chain it has a 330# 3 ply belt. Its below ground configuration allows you a pit length up to 120' with a width of 7'. The shaft height can go up to 20' and is equipped with a variable speed controller.
Systems start at $39,000
|
| |
| |
|
Specially designed sizes and options available.
Complete turn key system design and installation available.
Please contact our office to discuss your application so we can customize one of the above chain conveyor belts to suit your specific needs.
We offer layout drawings and savings analysis at no cost or obligation.
|
| |
| |
|
 |
| |
| |
|
|
 |
|
